S19262

TiPi Rubicon OC-192: 10GE & OC 192/48/12/3 DW/FEC/PM and AsyncMap Device with Strong FEC

Benefits

The TiPi-Rubicon-LH device is a wide-area and metropolitan transport device aimed at next-generation applications, required transparent mapping, and enhanced error correction capability.

Utilizes the ITU G.709 frame and overhead structures to enable deployment of full OTN compliant network elements.

Supports two gain rates, the standard G.975 based rate of 6.2 dB (raw optical coding gain), and APM’s proprietary EFEC code, rated at greater than 8.6 dB (raw optical coding gain). The TiPi-Rubicon-LH device is capable of running both these gains simultaneously, providing a superb single chip transponder solution for standard gain to enhanced gain networks.

Features

• GFP encapsulation used for packing 10GE LAN signal into “right-sized” OTU2 signal resulting in channel rate of 10.7 GHz
• Two different flow control options used on client to allow for 10GE LAN signal to be packed into OTU2
• 10GE LAN into OC-192C (through GFP) to allow for SONET grooming of 10GE client
• Proprietary 10GE LAN map to OTU2 without transport rate increase or client flow control
• Proven CMOS I/O from APM
• Provides up to 705 Mbps per I/O, covering 11.1 GHz operation for full bandwidth 10GE LAN client in an OTUk formatted signal and 11.27 GHz operation for 10G Fibre Channel client in an OTUk formatted signal
• Provides port swapping and output dual feed features for 1 + 1 line protection scheme
• Available on both client and line interfaces of Rubicon
• Best in class optical fidelity solution providing longest reach without regeneration
• 1 x OC-192/STM-64 mapping (239,237) per G.709
• Direct map (239,238) into ODU2
• 1 x OC-48/STM-16 mapping (239,238) per G.709
• Direct map (239,238) into ODU1
• Bi-directional add-drop ODU1, ODU2
• Bi-directional G.709 overhead processing and optional OTU2 fixed stuff columns access
• Dedicated GCC ports
• 1 x OC 192/48/12/3 TOH add-drop and processing
• 8B/10B monitoring
• 10GE monitoring
• SONET/SDH section and line termination
• TOH add-drop port
• LOS, OOF, LOF detection
• B1, B2 monitoring with programmable signal degrade and signal fail thresholds
• JO monitoring, SDH and SONET modes
• K1, K2 monitoring for APS changes, line AIS and line RDI
• Automatic, interrupt-driven, or manual AIS insertion
• Frame boundary output
• G.709 compliant frame structure
• 10.71, 10.66, 11.1, 11.27 Gbps enhanced FEC with > 8.6 dB coding gain
• G.709 overhead processing and nominal rate expansion
• Comprehensive channel statistics gathering
• Corrected bits, bytes
• Corrected zeros, ones (with outputs)
• Uncorrectable sub-frame count
• 16-bit 622 Mbps LVDS interface (MSA compliant) 10 Gbps interface
• Client-side and line-side loopback on the Rubicon
• Can synthesize SONET frame
• Error injection capability for verification of remote error reporting
• Test-set compliant pseudo-random sequence generation/analysis
• Glueless 16-bit interface to MPC860, 25 MHz to 66 MHz
• Dual-mode interface also supports Intel processors
• Interrupt-driven or polled mode operation
• FEC frame synchronous scrambling
• Programmable sequence detection
• 1.2 Volt core operation with 2.5 Volt I/O 
• SONET/SDH OC-48/STM-16 OC-192/STM-64 DWDM transport systems and DWDM metro networks
• Transparent add-drop multiplexing transponder applications
• Protocol transparent transport
• IaDI to IrDI FEC transponder chip (6.2 dB gain network to >8 dB gain network)